Abeco Fibre optic tools for easy to use removal of Kevlar Reinforced Sleeving, Silicone Coating and other Fibre Optic Leads Stripping.

The tool is designed to strip the outer insulation off a wide range of flat shaped fiber optic cables.

With this new approach of side stripping, removal of these hard insulations is made relatively easy.

The tool is equipped with an adjustable length stop.

Key Features:

• Precision Damage Free Stripping.
• Safe and Easy to Use.
• Adjustable Length Stop.

Specifications:

• Stripping Capacity: Optic Fiber Outer insulation Length: 38mm maximum
• Dimensions: 180mm x 80mm x 18mm
• Weight: 300gms

Abeco Fibre optic tools for easy to use removal of Kevlar Reinforced Sleeving, Silicone Coating and other Fibre Optic Leads Stripping.

This lever action hand tool is designed to remove any length of Kevlar reinforced protective sleeve from fibre optic bundles of between 2.5 and 6.5mm diameter.

Correct positioning of the sheath is ensured at all times by sleeve guides, selected according to the sheath diameter.

The tool cuts the Kevlar sleeve, first circumferentially and then pulled along it’s sleeve creating two longitudinal cuts simultaneously for easy removal.

Key Features:

• Accurate and Easy to Use.
• Circumferential and longitudinal cuts.
• Packed in a Smart Carry Case.

Specifications:

• Stripping Capacity: 2.5 to 6.5mm diameter of Kevlar reinforced protective sleeve.
• Dimensions: 17 x 15 x 135mm.
• Weight: 160gms

Abeco Fibre optic tools for easy to use removal of Kevlar Reinforced Sleeving, Silicone Coating and other Fibre Optic Leads Stripping.

Designed to remove the secondary coatings from optical leads and small cables up to 3000 microns.

Is equally effective whether used on ‘loose’ or ‘tight fit’ fibres.

Supplied with guide bushes to ensure precise location of fibre throughout the stripping operation.

Simple operating procedure with adjustable blades.

Key Features:

• Easy and Simple to Use.
• Highly Accurate Adjustable Cutting Depth
• Packed in its own Carry Case with a Set of Guide Bushes.

Specifications:

• Stripping Capacity: Fibre Optic leads from 0 - 3000 micron. P.T.F.E. coated wires 0.5 - 3.0 mm diameter.
• Dimensions: 29 x 13 x 108mm.
• Weight: 20gms

Abeco Fibre optic tools for easy to use removal of Kevlar Reinforced Sleeving, Silicone Coating and other Fibre Optic Leads Stripping.

Easy to use stripping tool for fast removal of primary silicone coatings from optical fibres.

The stripping blades are made of acetal and their permanently set angle brings the coating off smoothly when the tool is gently pulled along the fibre.

The tool design ensures no damage to the light guide even when excessive pressure is applied during the stripping operation.

Key Features:

• Damage Free
• Spring loaded
• Packed in Plastic Case

Specifications:

• Stripping Capacity: Fibre Optic leads from 15 - 3000 microns.
• Dimensions: 110 x 52 x 14mm.
• Weight: 30gms

Abeco Fibre optic tools for easy to use removal of Kevlar Reinforced Sleeving, Silicone Coating and other Fibre Optic Leads Stripping.

Strips P.T.F.E. and similar insulated wires and is ideal for workshop and laboratory use.

The simple operating procedure involves inserting the wire, twisting the tools and pulling off the insulation.

The tool comes complete in it’s own storage case including a set of guide bushes and a set of spare blades.

Key Features:

• Accurate and precise.
• Easy to Use.
• Supplied with a Set of Spare Blades.

Specifications:

• Stripping Capacity: 0.5 TO 4.5mm²
• Dimensions: 10 x 21 x 132mm.
• Weight: 32gms

Abeco Fibre optic tools for easy to use removal of Kevlar Reinforced Sleeving, Silicone Coating and other Fibre Optic Leads Stripping.

This Fibre Optic Preparation Set contains a complete range of special purpose tools designed specially for the preparation of single and multi mode optical fibres and cables ranging from micro coatings to reinforced loose tube constructions.

The kit is ideal for both field and laboratory use

Kit contains:

• Split Strip - For the removal of Kevlar protective sleeve.
• Opti Strip - For stripping the secondary coatings from optic fibres.
• Silica Strip - For the removal of primary coatings from fibre optic leads.
• Precision Cutters and screw drivers included.

Specifications:

• Stripping Capacity:
  Kevlar protective sleeve 2.5 to 6.5mm dia.
  Fibre Optic leads from 0 - 3000 micron.
  P.T.F.E. coated wires 0.5 - 3.0 mm dia.
• Dimensions: 295 x 200 x 50mm.