Air-powered cut and bend tool which cuts components on P.C. boards 1/16” above the surface and bends them over tight to the board.

The tool is small (5 1/2” long x 1 1/4” diameter) and lightweight (8oz.). Constructed of durable aluminum.
Maximum inlet air pressure is 80 psi.

Seven interchangeable cut and bend heads are available for different diameter components with 20°, 30° or 45° working angles.
Heads are made from hardened tool steel and are easily replaceable.
There are also four heads available for shorter layover (1/32” max. layover) in 20°, 30° and 45° angles.

Cut and Bend Heads sold separate from power packs.

Seven interchangeable cut and bend heads are available for different diameter components with 20°, 30° or 45° working angles.
Heads are made from hardened tool steel and are easily replaceable.

Available Heads For BP-1 Tool

Cut & Bend Heads:

• 4H-20 - Wire Size: 0.25-0.71mm, Angle: 20°
• 4H-30 - Wire Size: 0.25-0.71mm, Angle: 30°
• 4H-45 - Wire Size: 0.25-0.71mm, Angle: 45°
• 4H4-20 - Wire Size: 0.5-0.97mm, Angle: 20°
• 4H4-30 - Wire Size: 0.5-0.97mm, Angle: 30°
• 4H4-45 - Wire Size: 0.5-0.97mm, Angle: 45°
• 4HG-20 - Wire Size: 0.76-1.27mm, Angle: 20°

Short Layover Cut & Bend Heads:

• 4H4-20-SL - Wire Size: 0.25-0.97mm, Angle: 20°
• 4H4-30-SL - Wire Size: 0.25-0.97mm, Angle: 30°
• 4H4-45-SL - Wire Size: 0.25-0.97mm, Angle: 45°
• 4HG-20-AR - Wire Size: 0.76-1.27mm, Angle: 20°