SP-02P is designed to use the identical jaw sets as the SP-01P,
but delivers considerably more power for tougher applications.
Made of durable aluminum, the tool is small and measures
(5 1/2” long x 1 3/4” diameter),
Lightweight (13 oz.) and can be operated at air pressures of 60-100 psi.
SP-02P (850 lbs. of cutting force) can cut up to 0.10” soft steel wire.
A built in adjusting screw controls the opening of the jaw sets.

A foot operated model is available (SP-02PF)

Jaw sets sold separate. (see below)

These jaws shear soft wire at a specified “rise” distance above
the working surface and flatten the rise so it is mechanically
secure before soldering.

Jaws identified by the suffix “SR” do not include the crimp feature.

Specifications:

• Max. Soft Wire - 1.27 mm
• Rise - 1.1 mm
• Angle - 45°
• Length of Cut - 9.39 mm
• Max. Tip Opening - 3.81 mm

These jaws shear soft wire at a specified “rise” distance above
the working surface and flatten the rise so it is mechanically
secure before soldering.

Jaws identified by the suffix “SR” do not include the crimp feature.

Specifications:

• Max. Soft Wire - 0.76 mm
• Rise - 0.76 mm
• Angle - 45°
• Length of Cut - 3.04 mm
• Max. Tip Opening - 5.08 mm

These jaws shear soft wire at a specified “rise” distance above
the working surface and flatten the rise so it is mechanically
secure before soldering.

Jaws identified by the suffix “SR” do not include the crimp feature.

Specifications:

• Max. Soft Wire -0.76 mm
• Rise - 0.76 mm
• Angle - 90°
• Length of Cut - 3.04 mm
• Max. Tip Opening - 6.35 mm

These jaws shear soft wire at a specified “rise” distance above
the working surface and flatten the rise so it is mechanically
secure before soldering.

For use as a holding pliers or can be machined to suit special
requirements for cutting, crimping or holding.
Jaws are 7.62 mm thick.
Max. tip opening 9.90 mm.

These jaws are for cutting wires flush or semi-flush.
All jaws are secured in the housing by a shouldered pivot-screw with recessed hex head and can be reversed to facilitate right
or left handed use.
As with all Simonds jaw sets, they may be factory re-sharpened for extended life and lower production costs.

“CH” indicates case hardened jaw sets.

Specifications:

• Max. Soft Wire -1.5 mm
• Semi-Flush Cut (CD-1) - 0.18 mm
• Flush Cut (CD-11) - 0.18 mm
• Angle - 45°
• Length of Cut - 11 mm
• Max. Tip Opening - 5 mm

These jaws are for cutting wires flush or semi-flush.
All jaws are secured in the housing by a shouldered pivot-screw
with recessed hex head and can be reversed to facilitate right
or left handed use.
As with all Simonds jaw sets, they may be factory re-sharpened for extended life and lower production costs.

“CH” indicates case hardened jaw sets.

Specifications:

• Max. Soft Wire -1.2 mm
• Semi-Flush Cut (CD-3) - 0.18 mm
• Flush Cut (CD-31) - 0.18 mm
• Angle - 15°
• Length of Cut - 21 mm
• Max. Tip Opening - 7.6 mm

These jaws are for cutting wires flush or semi-flush.
All jaws are secured in the housing by a shouldered pivot-screw
with recessed hex head and can be reversed to facilitate right
or left handed use.
As with all Simonds jaw sets, they may be factory re-sharpened for extended life and lower production costs.

“CH” indicates case hardened jaw sets.

Specifications:

• Max. Soft Wire - 2 mm
• Semi-Flush - Cut Center Cut
• Angle - N/A
• Length of Cut - 12.7 mm
• Max. Tip Opening - 4.8 mm

These jaws are for cutting wires flush or semi-flush.
All jaws are secured in the housing by a shouldered pivot-screw
with recessed hex head and can be reversed to facilitate right
or left handed use.
As with all Simonds jaw sets, they may be factory re-sharpened for extended life and lower production costs.

Specifications:

• Plastic Only - 4.75 mm
• Full Flush Cut - Tapered Outside Edge
• Angle - 15°
• Length of Cut - 22.22 mm
• Max. Tip Opening - 12.25 mm

These jaws are for cutting wires flush or semi-flush.
All jaws are secured in the housing by a shouldered pivot-screw
with recessed hex head and can be reversed to facilitate right
or left handed use.
As with all Simonds jaw sets, they may be factory re-sharpened for extended life and lower production costs.

Specifications:

• Max. Soft Wire - 1.52 mm
• Rise - 1.02 mm
• Angle - 45°
• Length of Cut - 4.8 mm
• Max. Tip Opening - 2 mm

These jaws are for cutting wires flush or semi-flush.
All jaws are secured in the housing by a shouldered pivot-screw
with recessed hex head and can be reversed to facilitate right
or left handed use.
As with all Simonds jaw sets, they may be factory re-sharpened for extended life and lower production costs.

Specifications:

• Max. Soft Wire - 7.8 mm
• Rise - 1.04 mm
• Angle - 45°
• Length of Cut - 3.3 mm
• Max. Tip Opening - 5 mm

These jaws are for cutting wires flush or semi-flush.
All jaws are secured in the housing by a shouldered pivot-screw
with recessed hex head and can be reversed to facilitate right
or left handed use.
As with all Simonds jaw sets, they may be factory re-sharpened for extended life and lower production costs.

Specifications:

• Filament shears for cutting fine wire, nickel ribbon
  or soft wire of any metal up to 3.3 mm diameter.
• Jaws are 19 mm long.
• Maximum tip opening 5.3 mm

These jaws are for cutting wires flush or semi-flush.
All jaws are secured in the housing by a shouldered pivot-screw
with recessed hex head and can be reversed to facilitate right
or left handed use.
As with all Simonds jaw sets, they may be factory re-sharpened for extended life and lower production costs.

Specifications:

• PC Tab Cutter - 1.27 mm
• Flush Cut
• Angle 25°
• Length of Cut - 11.45 mm
• Max. Tip Opening - 6.60 mm

These jaws are for cutting wires flush or semi-flush.
All jaws are secured in the housing by a shouldered pivot-screw
with recessed hex head and can be reversed to facilitate right
or left handed use.
As with all Simonds jaw sets, they may be factory re-sharpened for extended life and lower production costs.

Specifications:

• Plastics Only - Soft
• Type of Cut - Flush Cut
• Angle - Straight Cutter
• Length of Cut - 25 mm
• Max. Tip Opening - 11.18 mm