Simonds standard line of tools made to the specific need of your production line. Automotive hinge pin tools, Oteker® clamp tools, and harness crimping tools are only a small example of special tools
designed and manufactured to solve an opportunity on the production line.

Simonds Clampmaster series of tools feature power packs ranging from
SP-01P through to SP-003. These combined with special jaws can
manipulate a wide variety of hose clamps from 1/4inch (6.35mm) through
to 3inch (76.2mm)

The Simonds SM-300 and SM-350 below are standard tools and fill
80% of all hose clamp needs.

Custom clamp tools are available.
Please enquire through our sales office at:
sales@international-tooling.co.uk

Simonds standard line of tools made to the specific need of your production line. Automotive hinge pin tools, Oteker® clamp tools, and harness crimping tools are only a small example of special tools
designed and manufactured to solve an opportunity on the production line.

The Simonds SM-300 CTB - Constant Tension band clamp tool accepts
clamps upto 2.44inch / 61.98mm

Simonds standard line of tools made to the specific need of your production line. Automotive hinge pin tools, Oteker® clamp tools, and harness crimping tools are only a small example of special tools
designed and manufactured to solve an opportunity on the production line.

The Simonds SM-350 Single wire clamp tool accepts clams upto
2.68 inch / 68.07mm without the clamp being twisted in the tool.

Simonds standard line of tools made to the specific need of your production line. Automotive hinge pin tools, Oteker® clamp tools, and harness crimping tools are only a small example of special tools
designed and manufactured to solve an opportunity on the production line.

Simonds PTX-468 is a complete clamp tool for crimping Oetiker clamps.
For automotive, RV, appliance and HVAC production lines.
A proven tool for increasing production and lower injuries due to repetative
motions.

Simonds standard line of tools made to the specific need of your production line. Automotive hinge pin tools, Oteker® clamp tools, and harness crimping tools are only a small example of special tools
designed and manufactured to solve an opportunity on the production line.

Snap ring pliers on an air powered tool. Depening on the power pack used
the Simonds SR-100 snap ring tool can handle rings ranging from
1/4 inch / 6.35mm through to 6 inch / 152.4mm.
The standard Simonds SR-100 Snap pring tool has a jaw openeing adjustment screw located at the rear of the SP-001-SR power pack.

Power Packs that can use the be used with the Snap ring tool are:
MSP-1 through to SP-002.

Simonds standard line of tools made to the specific need of your production line. Automotive hinge pin tools, Oteker® clamp tools, and harness crimping tools are only a small example of special tools
designed and manufactured to solve an opportunity on the production line.

Various Simonds disc clamp tools are available.
Please enquire through our sales office at:
sales@international-tooling.co.uk