INTERNATIONAL TOOLING LTD
Cutters, Pliers, Soldering - Call us!

Back XURON - Desolder Braid & Dispenser

Help take the work out of rework while increasing productivity and reducing cost.
Wickgunâ„¢ Desoldering Braid

Dispensers combine the capabilities of desoldering braid with the convenience of a hand tool.
Simple, one handed operation dispenses, positions and cuts off braid, even the smaller, hard to control sizes.
The only other tool you need is your soldering iron.
Wickgunâ„¢ Braid Dispensers fit comfortably in your hand.
Rotate the thumb wheel to advance or retract the braid; squeeze the trigger to cut offthe used braid.
There are no plungers to push, spring-loaded levers to cock or vacuum chambers to empty.
You never touch the braid. You don't burn your fingers.
You stay clean and solderability is enhanced since the desoldering braid is not contaminated
by finger oil or other foreign matter.

Desoldering Wick
Click to Enlarge

Xuron Wick Gun - Desolder Wick Dispenser

Online Shop
Coming
Soon

Click to
Email
Sales

In tests performed by XURON, technicians worked 3 to 5 times faster than they could with conventional desoldering braid on bobbins.
Wickgunâ„¢ Braid Dispensers feature replaceable/interchangeable cassettes, factory-loaded with 15 foot (4.6 meter) lengths of pure copper braid, impregnated with an RMA (rosin mildly active) flux.
Both the Wickgunâ„¢ and its replacement cassettes are manufactured from static-dissipative plastic so they can be used in conjunction with your electrostatic discharge (ESD) control program.

Xuron Wick Guns are available in the following braid sizes:

Part No. 1000-1 Size 1 - 0.89mm
Part No. 1000-2 Size 2 - 1.52mm
Part No. 1000-3 Size 3 - 1.93mm
Part No. 1000-4 Size 4 - 2.79mm

-----------------------------------------------------------------------------------------------------------

Desoldering Wick
Click to Enlarge

W4015-1
Xuron Desolder Braid Replacement Cassette Size 1

Online Shop
Coming
Soon

Click to
Email
Sales

Wickgunâ„¢ Braid Replacement Cassettes are factory-loaded with 15 foot (4.6 meter) lengths of pure copper braid, impregnated with an RMA
(rosin mildly active) flux.
Xuro De-solder Braid is manufactured from static-dissipative plastic so they can be used in conjunction with your electrostatic discharge (ESD) control program.