Xurons world famous, patented original Micro-Shear® flush cutter sets the standard imitators can’t meet.
Xuron invented it. Xuron perfected it. Xuron were awarded the patent (U.S. Pat. 3774301).
Shear cutting greatly reduces cutting effort while providing the shear cut desirable in electronics assembly work.
Less cutting effort means fewer fatigue related injuries and complaints.
The ergonomically shaped, nonslip Xuro-Rubber™ grips, glare eliminating black finish and light weight ensure operator comfort.
Ultra slim profile increases access in high density areas. Flush cuts soft wire up to 18 AWG (1.0 mm).
Also available with Black Anti-Static grips. Part No. 170-II-AS

The Xuron 2175 is an extremely durable and versatile wire cutter featuring Xurons patented Micro-Shear® cutting action.
Tough enough for harnesses and cables with the precision to cut material less than 1 mm. thick or work in high density areas.
Ergonomically shaped, non-slip Xuro-Rubber™ grips and a glare eliminating black finish ensure operator comfort.
Non-protruding, lifetime warranted flat spring provides excellent "feel" without excessive spring tension.
Flush cuts soft wire up to 12 AWG (2.05 mm).
Also available with Black Anti-Static grips. Part No. 2175-AS

Xuron patented Micro-Shear® cutting action combined with precision ground cutting edges, extra tough .100" thick high carbon steel blades, and an ultra slim profile for access in high density areas.
Sized for smaller hands and maximum manoeuvrability.
Flush cuts soft wire up to 16 AWG (1.29 mm).
Also available with Black Anti-Static grips. Part No. LX-AS

Xuron LX with a factory installed lead retainer.
Design provides a low profile and non-slip mounting on the shear.
Helps prevent flying leads and component shorting from stray leads.
Also available with Black Anti-Static grips. Part No. LX-F-AS

A special, extra tapered cutter head with an ultra-slim tip profile combined with the same Micro- Shear® cutting action, precision grinding, and tough high carbon steel blades of the standard LX.
Ultra-sharp, precision tip for access in highly restricted areas.
Flush cuts soft wire up to 20 AWG (0.8 mm).
Also available with Black Anti-Static grips. Part No. LX-T-AS

The premium grade version of the Xuron world famous 170-II Micro-Shear® Flush Cutter.
Its size and shape are optimized for work in high density areas.
The patented Micro-Shear® blade by-pass reduces both cutting effort and mechanical shock (impact) transmitted to the component.
High carbon steel blades are precision ground to ultra sharp cutting edges.
Its unique, state of the art heat treating process yields a Rockwell hardness of 55-57C.
The result is a tough, precise, durable flush cutter capable of reliably and economically cutting soft wire up to 18AWG (1.02mm).
Also available with Black Anti-Static grips. Part No. 410-AS

The Xuron 410 cutter with a factory-installed lead retainer.
The design provides a low profile and non-slip mounting on the shear.
Helps prevent flying leads and component shorting from stray leads.
Cuts soft wire up to 18 AWG (1.02mm)
Also available with Black Anti-Static grips. Part No. 410F-AS

The Xuron 410A is an ultra flush cutting version of our 410, for fine work.
Very lightly bevelled cutting edges allow for minimal blade by-pass (Click picture to see) ensuring the finest flush cut possible while still retaining the MIcro-Shear® blade by-pass type of cut.
Glare eliminating black finish and ergonomically shaped, non-slip Xuro-Rubber™ grips for operator comfort.
Cuts soft wire up to 20 AWG (0.8 mm)
Also available with Black Anti-Static grips. Part No. 410A-AS

The Xuron 410T has an ultra sharp precision tips and an extra thin tip profile.
Provides the ultimate in manoeuvrability and operator control; allows work in areas other tools cannot even enter.
Ideal for SMD or high density areas.
Due to the low mass of the cutter head, care should be exercised to avoid overstressing the tips.
Maximum cutting capacity is 22 AWG (0.64mm) soft wire.
Also available with Black Anti-Static grips. Part No. 410T-AS

The xuron 420 allows easier cutting in difficult areas.
Angled head provides excellent sight lines when used in either the vertical or horizontal position.
Slim profile for accessibility.
Glare eliminating black finish, non-slip Xuro-Rubber™ grips and light weight for operator comfort.
Flush cuts soft wire up to 20 AWG (0.8 mm).
Also available with Black Anti-Static grips. Part No. 420-AS

An ultra precise scissor, cuts fine or delicate items with a clean, square edge.
Cushion grip, Xuro- Rubber™ handles and our Light Touch™ return spring replace conventional finger loops for increased comfort and precision.
This innovative design is especially advantageous for users with arthritic hands.
Rated for cutting soft metals up to 0.05".
Also available with Black Anti-Static grips. Part No. 440-AS

The Xuron 635 Shear Rise Cutter combines a full flush, shear cut and a 0.01cm stand off in one cut.
It's ideal for manufacturers who need both a stand off and a full flush cut.
Glare eliminating black finish, ultra light weight and ergonomically- shaped, non-slip Xuro- Rubber™ grips ensure operator comfort.
High carbon steel guarantees durability.
Full flush cuts on soft wire up to 20 AWG (0.8 mm).
Also available with Black Anti-Static grips. Part No. 635-AS

The Xuron 670 Cut and Crimp Tool features a slim profile (0.085") that allows accessibility in high density areas and provides excellent sight lines for precise positioning.
Swaged leads are firmly attached to p.c.b., while freshly exposed lead material enhances solderability.
High carbon steel guarantees durability.
Ultra light weight, glare eliminating black finish and ergonomically
shaped, non-slip Xuro-Rubber» grips ensure operator comfort.
Cuts and crimps soft wire up to 20 AWG (0.8 mm).
Best results are achieved when the diameter of the hole on the p.c.b is not larger than 2.5 times the diameter of the wire being cut/crimped.
Also available with Black Anti-Static grips. Part No. 670-AS

The most durable Micro-Shear® flush cutter Xuron have ever made.
Tough alloyed steel, state of the art heat treating and ultra-precise CNC grinding combine to create the ultimate shear cutter.
The advanced ergonomic design, coupled with our exclusive Xuro-Rubber™ grips, Light Touch™ return spring and glare-eliminating black finish ensure operator comfort, even in high volume and large capacity applications.
Flush cuts soft wire up to 12 AWG (2.0 mm).
Also available with Black Anti-Static grips. Part No. 9100-AS

The Xuron 9100 with a factory installed lead retainer.
Ultra low profile design provides excellent access while special no-slip mounting ensures accurate positioning on the shear.
Helps prevent flying leads and component shorting from stray leads
Also available with Black Anti-Static grips. Part No. 9100F-AS

The Xuron 9100 with extra long handles.
Same tough alloyed steel, heat treating, grinding and ergonomic shape combined with added handle length and extra long Xuro-Rubber™ grips.
Reduces pressure on operator’s hand at any given point; offers more repositioning possibilities.
Flush cuts soft wire up to 12 AWG (2.0 mm).
Also available with Black Anti-Static grips. Part No. 9100LH-AS

The Xuron 9180 is designed and manufactured specifically for cutting the Kevlar® fibre strength component of fibre optic cables.
Uniquely designed serrated edge prevents the fibres from sliding out the front of the shear while cutting.
Cutting edges are heat treated to a hard 58-60 RC.
A superior tool offering both precision cutting and exceptional tool life.
Cushioned Xuro-Rubber™ grips and return spring provide both comfort and convenience.
Also available with Black Anti-Static grips. Part No. 9180-AS

The same as the standard Xuron model 9180 but without the serrated edge.
Designed for cutting applications where serrations are not necessary or not desired.
Appropriate for cutting soft sheet metals up to 0.031" (0.8mm).
Also available with Black Anti-Static grips. Part No. 9180NS-AS

Tapered head version of the Xuron 9100.
The same tough alloyed steel, heat treating and ultra-precise CNC grinding with a tapered head for improved access in high density areas and added precision.
Tapered head design allows positioning, even on fine pitch leads.
Precision-ground Micro-Shear® cutting edges guarantee a clean cut.
Flush cuts soft wire up to 14 AWG (1.6mm).
Also available with Black Anti-Static grips. Part No. 9200-AS

The Xuron 9200 with a factory installed lead retainer.
Ultra-low profile design provides excellent access while special no-slip mounting ensures accurate positioning on the shear.
Helps prevent flying leads and component shorting from stray leads.
Also available with Black Anti-Static grips. Part No. 9200F-AS

The Xuron 9200 with extra long handles.
Same tough alloyed steel, heat treating, grinding and ergonomic shape combined with added handle length and extra long Xuro-Rubber™ grips.
Reduces pressure on operator’s hand at any given point.
Offers more repositioning possibilities.
Flush cuts soft wire up to 14 AWG (1.6 mm).
Also available with Black Anti-Static grips. Part No. 9200LH-AS

The Xuron 9250 features a sub-miniature (Extra Tapered) head size for access into extremely restricted areas.
Ideal for ultra high density circuit boards and SMT.
Design offers strength with the superior durability of all 9000 Series shears.
Ergonomically shaped, cushioned Xuro-Rubber™ grips and our Light Touch™ return spring for operator comfort.
Glare eliminating black finish helps reduce eye strain and enhances contrast for more precise positioning.
Cuts wire up to 18 AWG (1.02 mm).
Also available with Black Anti-Static grips. Part No. 9250ET-AS

The Xuron 2193 has a large, full by-pass shear designed specifically for cutting music wire and other types of hardened wire.
Shearing cut combined with high mechanical advantage make cutting iron, hardened and tempered steel wire up to 12 AWG (2.05mm) seem effortless.
Cushioned Xuro- Rubber™ grips and our Light Touch™ return spring for operator comfort.
Cuts music wire up to 0.13mm diameter.

The Xuron 2193 with self-adjusting clamping fixtures which hold the material being cut perpendicular to the cutter jaws.
Greatly simplifies cutting process while adding significantly to both the precision of the cut and cutting capacity.
Gives square ended cuts on both the cut and off-cut sides.
Cuts music wire up to 0.060".

The Xuron 8500 Bio-Shear® flush cutters incorporate the popular curved grip design with all the ergonomic features of our standard 170-II.
Grip design keeps the knuckles of the operator’s hand in a straighter line and prevents the hand from completely closing, reducing the amount of effort expended while delaying fatigue.
Heat treated to 54-56RC for lasting durability.
Please designate either 8500L(left handed) or 8500R(right handed).
Also available with Black Anti-Static grips. Part No. 8500-AS

The Xuron 50 is a simple, yet highly effective wire stripper.
Manufactured from .100" thick high carbon steel, the 501 is designed to cut and strip all wire sizes from 10-26 AWG (2.59-0.405mm).
Thumb adjustable cam is quickly and easily set to the desired size, requiring no additional tools and no need to know the exact diameter of the wire.
Can be used for both solid and stranded wire.
Light weight, Xuro-Rubber™ grips and Light Touch™ return spring combine for operator comfort and ease of use.
Also available with Black Anti-Static grips. Part No. 501-AS

The Xuron 505 is similar in design to the model 501, but with the added benefit of having wire gauge markings on the cam and a handy closure "hook" that keeps the tool In a closed position when not In use.
Model 505 is designed for solid wire from 12-26 AWG (2.05m-.405).
Feature Xuron's Light Touch™ return spring and cushioned, non-slip Xuro-Rubber™ grips.
Also available with Black Anti-Static grips. Part No. 505-AS

The Xuron 505 is similar in design to the model 501, but with the added benefit of having wire gauge markings on the cam and a handy closure "hook" that keeps the tool In a closed position when not In use.
Model 505ST for stranded wire.Feature Xuron's Light Touch™ return spring and cushioned, non-slip Xuro-Rubber™ grips.
Also available with Black Anti-Static grips. Part No. 505ST-AS

The Xuron 573 is a patented, original strain-relief forming hand tool.
Radius and depth of bend are controlled by a simple slide adjuster, which locks firmly in place to prevent unintended setting changes.
This high carbon steel tool features light weight, glare-eliminating black finish and ergonomically shaped, non-slip Xuro-Rubber™ grips.
Forms lead wires up to 0.030" (0.8mm).
Also available with Black Anti-Static grips. Part No. 573-AS

The Xuron 573L is a patented, original strain-relief forming hand tool.
Radius and depth of bend are controlled by a simple slide adjuster, which locks firmly in place to prevent unintended setting changes.
This high carbon steel tool features light weight, glare-eliminating black finish and ergonomically shaped, non-slip Xuro-Rubber™ grips.
Forms lead wires up to 0.050" (1.3mm).
Also available with Black Anti-Static grips. Part No. 573L-AS

The Xuron 590 is for a light weight, fast-action, ultra-quiet, pneumatic Micro-Shear® flush cutter, choose the 590.
It requires only 50 p.s.i. air pressure.
Flush cuts soft wires up to 16 AWG (1.27mm)

The Xuron 590F is the same as the 590 but with a factory installed lead retainer.
Its design provides a low profile and non-slip mount on the cutter head that helps prevent flying lead problems that result in component shorting.

The Xuron 590LP’s relieved head and slim profile allows superior access in high density areas.
Flush cuts soft wire up to 20 AWG (0.8mm).